Known protocols are as follows:
1. Ethernet
2. Local Talk
3. Token Ring
4. FDDI
5. ATM
Ethernet
Ethernet protocol is by far the most widely used, the Ethernet access method called CSMA / CD (Carrier Sense Multiple Access / Collision Detection). This is a system where each computer listens to the cable network before sending anything into it. If there is no activity in a tissue or clean the computer will transmit the data, if any other transmissions on the cable, the computer will
wait and will try to re-transmission if the network is clean.
Sometimes, two computers can transmit at the same time, when this happens, each computer will be back and will wait
random chance to transmit data back. This method is known
with the coalition, and will not effect the speed of transmission on the network.
The Ethernet protocol allows for linear bus, star, or tree. Data can be transmitted over twisted pair cable, coaxial, or fiber optic cable at speeds of 10 Mbps.
LocalTalk
talkLocalTalk local network which is a protocol developed by Applem Computer, Inc.. for Macintosh machines. The method used by LocalTalk is CSMA / CA (Carrier Sense Multiple Access with Collision Avoidance). Similar to the CSMA / CD .. LocalTalk adapters and cables
special twisted pair can be used to connect multiple computers
through serial port. Macintosh Operating System is a network connection enables peer-to-peer without the need for additional specific applications
LocalTalk protocol allows for linear bus, star, or tree model using twisted pair cables. The most glaring deficiency is the speed of transmission. Transmission speed of only 230 Kbps.
Ring Token
Token Token ringProtokol developed by IBM in mid-1980. The access methods through the passage of a token in a circle like a ring. In token ring, the computers are connected to each other like a ring. A token moves signal rotates in a circle (ring) in a network and moving from one computer to the next computer, if at a stopover in one of the computer there was data to be transmitted, the token will transport it to where it wanted addressed data, token moves on to connect to each other between each computer.
Token Ring protocol requires a network model Stars using twisted pair cable or fiber optic cable. And can perform the transmission speed of 4 Mbps or 16 Mbps. Along with the development of Ethernet, Token Ring usage dwindled until now.
FDDI
fddiFiber Distributed Data Interface (FDDI) is a network protocol
linking between two or more networks even at great distances
. Aksesnyayang method used by FDDI is a token model. FDDI uses two physical ring topology. Transmission process baiasanya
using a single ring, but if there is a problem is found it will automatically use the second ring. An advantage of the FDDI
is the speed by using a fiber optic cable at 100 Mbps speed.
ATM
atmATM stands for Asynchronous Transfer Mode (ATM) is a network protocol that transmits at speeds of 155 Mbps or more. Mentarnsmisikan ATM data into a single package where another transfer protocol on the big-small package. ATM supports various media such as videos, CD-audio, and pictures. ATM working on Star topology models, using fiber optic cable or twisted pair cables. ATMs are generally used to connect two or more LANs. He is also widely used by Internet Service Providers (ISPs) to increase speed Internet access for their clients.
Conclusion to the Protocol:
Protokol yang di Pakai | Kabel yang digunakan | ||
Ethernet | Twisted Pair, Coaxial,Fiber | 10 Mbps | Linear Bus, Star,Tree |
Fast Ethernet | Twisted Pair, Fiber | 100 Mbps | Star |
LocalTalk | Twisted Pair | 0.23 Mbps | Linear Bus or Star |
Token Ring | Twisted Pair | 4 Mbps - 16 Mbps | Star-Wired Ring |
FDDI | Fiber | 100 Mbps | Dual ring |
ATM | Twisted Pair, Fiber | 155-2488 Mbps | Linear Bus, Star,Tree |
0 comments: on "Various kinds of protocols in the network known"
Post a Comment